Able to log from Innovate Motorsports 2.Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector.Standalone datalogs to microSD / microSDHC card without a laptop.
J2534 PassThru support with Windows DLL. USB 2.0 full speed device (USB-A/Mini cable included). Choose the adapter you need from the 'Reflash Adapters' drop down list on the right side of this page. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. Before flashing and after reading the program checks the firmware and checksums, and corrects them if needed. For Mitsubishi, you'll need the adapter for most pre CAN vehicles which include the 5-9 Evo. It can use any adapter supporting J2534 standard, e.g. No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models. For Subaru you'll only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you're working on an early non USDM STi in which case you made need one of our WRX adapters. We include a USB cable with each OpenPort, which is all the hardware you'll need unless you have one of the few vehicles that require a separate reflash adapter. (We don't provide software and after-sale service support if you use other third-party software) 7. The Openport J2534 is also compatible with Mercedes Xentry Passthry, VW Audi Skoda, Ford, Mazda software. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. Tactrix Openport 2.0 was excellently tested with Toyota/ Ford/ Mazda/ Jaguar/ LandRover/ Mitsubishi/ Subaru 6. The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface.
0 kommentar(er)
